
Retail Price:
Exfora is our at-home microdermabrasion system that uses medical-grade, diamond-encrusted heads to expertly exfoliate and suction away dead skin cells (and other impurities) that can clog pores, leading to inflammation, spots, blackheads and acne breakouts.
At the same time, it stimulates skin, promoting blood circulation, accelerating skin tissue development and collagen production.
The customizable suction strength lets you alternate based on your comfort level while the smart screen directs your experience, tracks the auto-mode time and monitors the suction strength and battery charge.
Unlike chemical microdermabrasion, Exfora is gentler on skin and is ideal for those who are especially sensitive. Make Exfora a part of your regular weekly skincare routine to help reduce the appearance of wrinkles, promote even skin tone, fight acne, shrink pores and improve the absorption of your favorite skincare products.
How to use:
1. To turn Exfora on, press the Power Button—the LCD screen will light up and the wand will enter standby mode.
2. Choose the mode you would like to use:
3. Press the Start/Pause Button. Then, let the head gently suction your skin, making sure that it’s perpendicular to the surface while moving the device as directed by the LCD screen. Try not to hover over a single spot for too long and, if possible, use your free hand to hold your skin taught and firm—this will make Exfora even more effective.
4. You can adjust the suction level by pressing either the Up or Down Arrow while the system is on. Level 1 is the weakest while level 3 provides the strongest suction.
5. Feel free to pause the wand at any time with the Start/Pause Button. Exfora will turn off shortly after.
Auto Mode
This mode guides you through a quick, four-minute session that leaves you with cleaner and healthier looking skin. Throughout the session, Exfora will beep when it’s time to move on to the next area of your face. If you’d like to adjust the suction strength while in Auto Mode, simply use the Up or Down Arrow.
Step 1 : At night start by washing your face, and Patting dry.
Step 2: Press the power button to turn Exfora on.
Step 3: Select auto mode with the mode button and press the play/Start button to begin auto made.
Step 4: Follow the on screen guide of directional arrows by gliding the device across the skin. This will exfoliate the skin.
Step 5: When it is time to switch sections of the face the unit will pause and beep so you know to look at the screen for the next set of instructional arrows.
Step 6: Once the full face is done and exfoliated the motor will turn off.
Step 7: Turn Exfora off and clean the diamond tip, and replace the filter so it is ready for the next uses.
We recommend using Exfora at night. Why? Night, specifically during sleep, is when our skin begins to heal. Also, at night, we’re more likely to apply restorative skincare products rather than makeup.
Wash your face before using Exfora. This will remove makeup and other impurities, helping to enhance your exfoliating experience.
Make sure to start with the first suction level (on your arm) to test your skin’s sensitivity
There are two ways to charge your Exfora:
1. Place the wand in the groove of the charging base, fitting the device onto the pin. Then, insert the USB cord.
2. Insert the USB cord directly into the bottom of the wand.
The battery symbol on the LCD screen will appear full when the device is fully charge. This usually takes three hours.
The Charging Indicator will flash on the LCD screen and will be accompanied by beeping when the battery is low. After this, Exfora will change to standby mode and turn off after ten seconds.